CAN ANYONE TELL ME WHAT IS GOING ON WITH THIS WELL WITH THIS LANGUAGE? I DO NOT QUITE UNDERSTAND IT–THANKS
16:00 PM - Open well, RIH with Well Tech Tractor, CCL & Vision Overshot @ 2,600 psi casing pressure. Correlate depth with liner top @ 10,443’. Check weight @ 10,900’, 1060#. Weight @ 12,030’, 1700#. Stall tractor @ 12,758’. Pick up 100’ and go back down to 12,550’. End of tools @ 12,772’. TOH.
20:30 PM - OOH. Disarm guns, lay down fish, tractor and wireline tools. Make ready to plug and perf.
22:00 PM - Pressure test lines to 9,500 psi. Open well with 2,750 psi. Pump 50 bbl linear gel sweep, followed by 570 bbl flush @ 3-13 bpm with max pressure of 6,891 psi. 6,650 psi avg.
01:50 AM - R/U wireline and RIH with 3.70" dummy gun, correlate on depth with liner top @ 10,443’ while running in hole. Pump tools down from 10,500’ @ 2-10 BPM. Max pressure of 6,000 psi to a depth of 20,070’.
POOH. RU & RIH with Cased Hole Solutions CCL, 2-3/4" wt. bar, 4 - 3-1/8" Powerjet perf guns rigged for 6 spf, 60 degree phasing, setting tool & Baker 3.40" CFP. Correlate on depth with liner top @ 10,443’ while running in hole. Pump tools down from 10,450’ @ 2-8 bpm. Max pressure of 6,100 psi. Line tension of 1,700# @ 390 ft/min to a depth of 20,070’. Position & set plug @ 20,005’. Position & perforate as per stage #6 procedure @ 19,960’, 19,925’, 19,859’ & 19,810’. All shots indicated to fire. POOH.