# Who is drilling next to me

**URL:** https://www.mineralrightsforum.com/t/who-is-drilling-next-to-me/50838
**Category:** Hughes County, OK
**Created:** [September 12, 2019, 5:43pm UTC](https://www.mineralrightsforum.com/t/who-is-drilling-next-to-me/50838 "2019-09-12T17:43:43Z")
**Posts on this page:** 6
**Page:** 1

<div class="post-metadata">

### Author: ![Randyl89](https://www.mineralrightsforum.com/letter_avatar_proxy/v4/letter/r/dbc845/32.png) [@Randyl89](https://www.mineralrightsforum.com/u/Randyl89)
#### Post date: [September 12, 2019, 5:43pm UTC](https://www.mineralrightsforum.com/t/who-is-drilling-next-to-me/50838/1 "2019-09-12T17:43:43Z")

</div>

Does anyone have any knowledge of leasing or drilling around Section 30-6N-9E? I would appreciate any information. My acreage is leased to Corterra until Oct. 3, 2019.

---

<div class="post-metadata">

### Author: ![R\_Heston](https://www.mineralrightsforum.com/letter_avatar_proxy/v4/letter/r/90ced4/32.png) [@R\_Heston](https://www.mineralrightsforum.com/u/R_Heston)
#### Post date: [September 12, 2019, 7:45pm UTC](https://www.mineralrightsforum.com/t/who-is-drilling-next-to-me/50838/2 "2019-09-12T19:45:53Z")

</div>

Corterra had a drilling permit for Section 30 & 31-6N-9E from May 2018 to May 2019. You might have to look and see if they drilled. If they started late in the permit time frame, you might still have a few months before they start paying.

---

<div class="post-metadata">

### Author: ![M\_Barnes](https://www.mineralrightsforum.com/user_avatar/www.mineralrightsforum.com/m_barnes/32/10942_2.png) [@M\_Barnes](https://www.mineralrightsforum.com/u/M_Barnes)
#### Post date: [September 12, 2019, 7:56pm UTC](https://www.mineralrightsforum.com/t/who-is-drilling-next-to-me/50838/3 "2019-09-12T19:56:47Z")

</div>

The Jack 3031-1HX is permitted for a surface location in section 20. The original permit was for 5/3/18-11/3/18. They received an additional six month extension for that one. I do not see an additional extension past May 3, 2019. I do not see a spud date from section 20 either.

Interesting thing is that they have another well planned from the same surface section going south into 29 & 32. That permit has until 3/25/20 to be drilled. No spud date on it either.

In that area, it is either Corterra or Silver Creek. Right now only Corterra has permits from late 2017 to Sept 2018.

---

<div class="post-metadata">

### Author: ![Randyl89](https://www.mineralrightsforum.com/letter_avatar_proxy/v4/letter/r/dbc845/32.png) [@Randyl89](https://www.mineralrightsforum.com/u/Randyl89)
#### Post date: [September 12, 2019, 9:18pm UTC](https://www.mineralrightsforum.com/t/who-is-drilling-next-to-me/50838/4 "2019-09-12T21:18:21Z")

</div>

Thank you for the information. How do I know they are not pulling minerals from my land? There is a well two miles north and two miles west. I had been told Corterra had money problems is why they haven’t done much.

---

<div class="post-metadata">

### Author: ![M\_Barnes](https://www.mineralrightsforum.com/user_avatar/www.mineralrightsforum.com/m_barnes/32/10942_2.png) [@M\_Barnes](https://www.mineralrightsforum.com/u/M_Barnes)
#### Post date: [September 12, 2019, 10:46pm UTC](https://www.mineralrightsforum.com/t/who-is-drilling-next-to-me/50838/5 "2019-09-12T22:46:48Z")

</div>

The area of drainage for a horizontal shale well is generally very narrow. Think of a cigar. The OCC (Oklahoma Corporation Commission) has very particular rules about how close a well can be drilled near a lease line to prevent that sort of problem.

---

<div class="post-metadata">

### Author: ![MRFAdmin\_SV](https://www.mineralrightsforum.com/letter_avatar_proxy/v4/letter/m/e0b2c6/32.png) [@MRFAdmin\_SV](https://www.mineralrightsforum.com/u/MRFAdmin_SV)
#### Post date: [January 11, 2025, 6:08pm UTC](https://www.mineralrightsforum.com/t/who-is-drilling-next-to-me/50838/6 "2025-01-11T18:08:59Z")

</div>


