# Spacing 1280 on 2 sections

**URL:** https://www.mineralrightsforum.com/t/spacing-1280-on-2-sections/11707
**Category:** Oil and Gas Leasing Help
**Created:** [February 3, 2014, 3:56am UTC](https://www.mineralrightsforum.com/t/spacing-1280-on-2-sections/11707 "2014-02-03T03:56:09Z")
**Posts on this page:** 9
**Page:** 1

<div class="post-metadata">

### Author: ![Deborah\_Lynne\_Gerst](https://www.mineralrightsforum.com/user_avatar/www.mineralrightsforum.com/deborah_lynne_gerst/32/3242_2.png) [@Deborah\_Lynne\_Gerst](https://www.mineralrightsforum.com/u/Deborah_Lynne_Gerst)
#### Post date: [February 3, 2014, 3:56am UTC](https://www.mineralrightsforum.com/t/spacing-1280-on-2-sections/11707/1 "2014-02-03T03:56:09Z")

</div>

When this happens and they begin in 27 and go through 22, what happens to the royalties?

---

<div class="post-metadata">

### Author: ![Kevin5](https://www.mineralrightsforum.com/letter_avatar_proxy/v4/letter/k/bbce88/32.png) [@Kevin5](https://www.mineralrightsforum.com/u/Kevin5)
#### Post date: [February 3, 2014, 4:16am UTC](https://www.mineralrightsforum.com/t/spacing-1280-on-2-sections/11707/2 "2014-02-03T04:16:32Z")

</div>

Take your 13.5 acres and divide by 1280. That is your interest in the well. Then if you are leased, be sure to take out the %. If you are leased at 16% take the number times .84. That will be the number to calculate your share. Assuming it is a cost-free royalty.

---

<div class="post-metadata">

### Author: ![Rick\_Howell](https://www.mineralrightsforum.com/user_avatar/www.mineralrightsforum.com/rick_howell/32/7998_2.png) [@Rick\_Howell](https://www.mineralrightsforum.com/u/Rick_Howell)
#### Post date: [February 3, 2014, 4:23am UTC](https://www.mineralrightsforum.com/t/spacing-1280-on-2-sections/11707/3 "2014-02-03T04:23:12Z")

</div>

Kevin,

From the looks of her profile, she has Oklahoma properties. Oklahoma does not have an actual 1280 spacing. They have two 640-acre units served by the same lateral. So the footage on the lateral will determine what each unit shares. Then your calculation will determine the owner’s share of the unit.

This article explains it far better than my attempt at it

[http://www.iogcc.state.ok.us/Websites/iogcc/images/2011BuffaloPresentations/LegalReg-Wrotenbery2.pdf](http://www.iogcc.state.ok.us/Websites/iogcc/images/2011BuffaloPresentations/LegalReg-Wrotenbery2.pdf)

---

<div class="post-metadata">

### Author: ![Rick\_Howell](https://www.mineralrightsforum.com/user_avatar/www.mineralrightsforum.com/rick_howell/32/7998_2.png) [@Rick\_Howell](https://www.mineralrightsforum.com/u/Rick_Howell)
#### Post date: [February 3, 2014, 4:24am UTC](https://www.mineralrightsforum.com/t/spacing-1280-on-2-sections/11707/4 "2014-02-03T04:24:36Z")

</div>

Deborah,

What is the rest of the legal description? The township and the range are important in locating the spacing orders.

---

<div class="post-metadata">

### Author: ![Kevin5](https://www.mineralrightsforum.com/letter_avatar_proxy/v4/letter/k/bbce88/32.png) [@Kevin5](https://www.mineralrightsforum.com/u/Kevin5)
#### Post date: [February 3, 2014, 4:28am UTC](https://www.mineralrightsforum.com/t/spacing-1280-on-2-sections/11707/5 "2014-02-03T04:28:16Z")

</div>

Sorry about that. I assumed it was a 1280. Thanks Rick.

---

<div class="post-metadata">

### Author: ![Rick\_Howell](https://www.mineralrightsforum.com/user_avatar/www.mineralrightsforum.com/rick_howell/32/7998_2.png) [@Rick\_Howell](https://www.mineralrightsforum.com/u/Rick_Howell)
#### Post date: [February 3, 2014, 4:40am UTC](https://www.mineralrightsforum.com/t/spacing-1280-on-2-sections/11707/6 "2014-02-03T04:40:03Z")

</div>

It sure would make the calculations easier!!

Kevin said:

Sorry about that.. I assumed it was a 1280. Thanks Rick.

---

<div class="post-metadata">

### Author: ![Rick\_Howell](https://www.mineralrightsforum.com/user_avatar/www.mineralrightsforum.com/rick_howell/32/7998_2.png) [@Rick\_Howell](https://www.mineralrightsforum.com/u/Rick_Howell)
#### Post date: [February 3, 2014, 5:00am UTC](https://www.mineralrightsforum.com/t/spacing-1280-on-2-sections/11707/7 "2014-02-03T05:00:27Z")

</div>

Debrah

This must be the well you are talking about. They started drilling in the last week.

> **[1DD1AE18.pdf](https://imaging.occ.ok.gov/OG/Well%20Records/1DD1AE18.pdf)**
>
> 9.27 KB

Currently they have it dividing the production 50-50 between Section 22 and Section 27. Once the well is complete, they will determine the final split.

This is what it looks like [http://imaging.occeweb.com/AP/CaseFiles/OCC4387552.PDF](http://imaging.occeweb.com/AP/CaseFiles/OCC4387552.PDF)

---

<div class="post-metadata">

### Author: ![Deborah\_Lynne\_Gerst](https://www.mineralrightsforum.com/user_avatar/www.mineralrightsforum.com/deborah_lynne_gerst/32/3242_2.png) [@Deborah\_Lynne\_Gerst](https://www.mineralrightsforum.com/u/Deborah_Lynne_Gerst)
#### Post date: [February 3, 2014, 1:25pm UTC](https://www.mineralrightsforum.com/t/spacing-1280-on-2-sections/11707/8 "2014-02-03T13:25:38Z")

</div>

Yes this is me Section 27, Township 21N, Range 3W.

---

<div class="post-metadata">

### Author: ![system](https://www.mineralrightsforum.com/uploads/db5755/original/3X/6/c/6c7c56608c843272ad6e3662ce9562a5956f173e.png) [@system](https://www.mineralrightsforum.com/u/system)
#### Post date: [August 15, 2018, 12:57am UTC](https://www.mineralrightsforum.com/t/spacing-1280-on-2-sections/11707/9 "2018-08-15T00:57:55Z")

</div>


