# Slo-Poke 1-33H division orders
**URL:** https://www.mineralrightsforum.com/t/slo-poke-1-33h-division-orders/1550
**Category:** Blaine County, OK
**Created:** [November 14, 2017, 4:57pm UTC](https://www.mineralrightsforum.com/t/slo-poke-1-33h-division-orders/1550 "2017-11-14T16:57:31Z")
**Posts on this page:** 5
**Page:** 1
### Author:  [@kendall\_wiley](https://www.mineralrightsforum.com/u/kendall_wiley)
#### Post date: [November 14, 2017, 4:57pm UTC](https://www.mineralrightsforum.com/t/slo-poke-1-33h-division-orders/1550/1 "2017-11-14T16:57:31Z")
Just received division orders from Carreera Energy and a little confused on the interest payment. I own 160 acres of mineral rights in this section with a lease at 3/16th, but the orders indicate a .04687500 what am I missing?
---
### Author:  [@C\_Bowden](https://www.mineralrightsforum.com/u/C_Bowden)
#### Post date: [November 14, 2017, 6:01pm UTC](https://www.mineralrightsforum.com/t/slo-poke-1-33h-division-orders/1550/2 "2017-11-14T18:01:26Z")
320/1280\*.1875 so it’s your acreage divide by the spacing of the well (2 Sections at 640 each) times your 3/16th interest
---
### Author:  [@C\_Bowden](https://www.mineralrightsforum.com/u/C_Bowden)
#### Post date: [November 14, 2017, 6:03pm UTC](https://www.mineralrightsforum.com/t/slo-poke-1-33h-division-orders/1550/3 "2017-11-14T18:03:02Z")
I thought I read 320 acres so you are on a single Section well so it’s 160/640\*.1875
---
### Author:  [@M\_Barnes](https://www.mineralrightsforum.com/u/M_Barnes)
#### Post date: [November 14, 2017, 7:55pm UTC](https://www.mineralrightsforum.com/t/slo-poke-1-33h-division-orders/1550/4 "2017-11-14T19:55:03Z")
The formula is net acres/spacing acres x royalty x % of perfs in your section.
You have 160/640 x .1875 x 1.0 (single section well) = .25 x .1875 x 1.00 = 0.046875.
Your Division order is correct. If it comes up a bit off sometimes, the first place I look is to see whether the section is truly 640 acres (many of the first row and west column of sections are not always a pure 640). The second place to check is the true percent of perforations in your section if a multi-section well. It is not always 50%. In your case, you have a single section well, so it is 100% or 1.0. You are correct in all terms of the equation.
---
### Author:  [@system](https://www.mineralrightsforum.com/u/system)
#### Post date: [August 14, 2018, 10:11pm UTC](https://www.mineralrightsforum.com/t/slo-poke-1-33h-division-orders/1550/5 "2018-08-14T22:11:16Z")