# Payment breakdown
**URL:** https://www.mineralrightsforum.com/t/payment-breakdown/59149
**Category:** Grady County, OK
**Created:** [October 2, 2020, 9:31pm UTC](https://www.mineralrightsforum.com/t/payment-breakdown/59149 "2020-10-02T21:31:19Z")
**Posts on this page:** 8
**Page:** 1
### Author:  [@graceful99](https://www.mineralrightsforum.com/u/graceful99)
#### Post date: [October 2, 2020, 9:31pm UTC](https://www.mineralrightsforum.com/t/payment-breakdown/59149/1 "2020-10-02T21:31:19Z")
What is the difference in Owner Interest and Distribution Interest? Both interests are shown on payment breakdown. Thank you.
---
### Author:  [@M\_Barnes](https://www.mineralrightsforum.com/u/M_Barnes)
#### Post date: [October 5, 2020, 5:47pm UTC](https://www.mineralrightsforum.com/t/payment-breakdown/59149/2 "2020-10-05T17:47:01Z")
Can’t really comment without seeing the stub headings. Are the decimals listed the same?
---
### Author:  [@graceful99](https://www.mineralrightsforum.com/u/graceful99)
#### Post date: [October 5, 2020, 9:09pm UTC](https://www.mineralrightsforum.com/t/payment-breakdown/59149/3 "2020-10-05T21:09:05Z")
Thank you, Martha.
I was looking at the Excel worksheet and now have the actual stub. On the stub, it shows Entitlement Decimal and Disbursement Decimal. Both are different than my actual decimal interest. They are under Deduct Code 03 (Processing) for oil. What is the Comanches Severance tax which is shown as an owner deduction? I never saw this as a deduction on my old well, same lease.
Martha, I understand these questions are probably impossible to answer without seeing the stub. If you have any idea what these are I would appreciate hearing from you. Otherwise, I will call Camino. Thanks again.
---
### Author:  [@M\_Barnes](https://www.mineralrightsforum.com/u/M_Barnes)
#### Post date: [October 5, 2020, 10:23pm UTC](https://www.mineralrightsforum.com/t/payment-breakdown/59149/4 "2020-10-05T22:23:00Z")
I would suggest that you call Camino. There are some new severance taxes that are “voluntary”, so get them to turn them off if you do not want to pay them.
---
### Author:  [@graceful99](https://www.mineralrightsforum.com/u/graceful99)
#### Post date: [October 6, 2020, 5:55pm UTC](https://www.mineralrightsforum.com/t/payment-breakdown/59149/5 "2020-10-06T17:55:27Z")
If gas is a higher BTU, would that change the decimal point I receive?
Thanks.
---
### Author:  [@M\_Barnes](https://www.mineralrightsforum.com/u/M_Barnes)
#### Post date: [October 6, 2020, 8:47pm UTC](https://www.mineralrightsforum.com/t/payment-breakdown/59149/6 "2020-10-06T20:47:17Z")
No. BTU only affects the price received.
Your decimal is calculated by a formula in OK.
net mineral acres/spaced acres (actual) x royalty x Percent perforations in your section.
For example: 10 net mineral acres, 20% royalty, 640 spacing and actual section is 640 acres, 48% perforations in your section of a multi section well.
10/640 x .20 \* .48=0.00015 Some sections are not 640 acres, so the actual acreage of the section is used. Sections 1-6, 7, 18, 19, 30, 31 are usually not 640 acres and have been corrected for the curvature of the earth.
---
### Author:  [@TODD\_M\_Baker](https://www.mineralrightsforum.com/u/TODD_M_Baker)
#### Post date: [October 6, 2020, 8:48pm UTC](https://www.mineralrightsforum.com/t/payment-breakdown/59149/7 "2020-10-06T20:48:20Z")
No. BTU only affects the price paid for the gas. Higher BTU, higher price.
Usually the difference in the decimal interests has to do with the elections of the parties taking gas or oil in kind versus having the operator take the same. As you said, it is difficult to know without seeing the actual check stub. Martha is correct that to get the answers you are looking for, contact Camino via regular mail.
---
### Author:  [@system](https://www.mineralrightsforum.com/u/system)
#### Post date: [December 31, 2020, 9:31pm UTC](https://www.mineralrightsforum.com/t/payment-breakdown/59149/8 "2020-12-31T21:31:21Z")
This topic was automatically closed after 90 days. New replies are no longer allowed.