# New to forum Reeves County

**URL:** https://www.mineralrightsforum.com/t/new-to-forum-reeves-county/22056
**Category:** General Mineral Rights Discussion
**Created:** [February 1, 2012, 6:58pm UTC](https://www.mineralrightsforum.com/t/new-to-forum-reeves-county/22056 "2012-02-01T18:58:02Z")
**Posts on this page:** 4
**Page:** 1

<div class="post-metadata">

### Author: ![Kerry2](https://www.mineralrightsforum.com/letter_avatar_proxy/v4/letter/k/bb73d2/32.png) [@Kerry2](https://www.mineralrightsforum.com/u/Kerry2)
#### Post date: [February 1, 2012, 6:58pm UTC](https://www.mineralrightsforum.com/t/new-to-forum-reeves-county/22056/1 "2012-02-01T18:58:02Z")

</div>

Wife inherited acreage in Section 82, Block 4, H & GN Reeves County. Completed lease with KEW end of July. We were told to expect permit by Nov. drilling in Jan. Have viewed Tex RR CO GIS but can’t find out much if anything. If you know of anything would you post. Thanks K

---

<div class="post-metadata">

### Author: ![Ann\_Whitchurch](https://www.mineralrightsforum.com/user_avatar/www.mineralrightsforum.com/ann_whitchurch/32/4820_2.png) [@Ann\_Whitchurch](https://www.mineralrightsforum.com/u/Ann_Whitchurch)
#### Post date: [February 2, 2012, 1:36am UTC](https://www.mineralrightsforum.com/t/new-to-forum-reeves-county/22056/2 "2012-02-02T01:36:28Z")

</div>

I check Texas RRC permits. I go to the end, the most recent, then come back - that keeps you from wading through pages and pages of old well permits. The permits have dates so you can see where you are.

Ann Whitchurch

---

<div class="post-metadata">

### Author: ![Buddy\_Cotten](https://www.mineralrightsforum.com/user_avatar/www.mineralrightsforum.com/buddy_cotten/32/5079_2.png) [@Buddy\_Cotten](https://www.mineralrightsforum.com/u/Buddy_Cotten)
#### Post date: [February 6, 2012, 11:46pm UTC](https://www.mineralrightsforum.com/t/new-to-forum-reeves-county/22056/3 "2012-02-06T23:46:20Z")

</div>

In your search parameters, you can put in a date range, along with the County or district code. After the date range is populated, you set the view to all records and then you can actually cut and paste into an Excel spreadsheet and manipulate the data in any way you wish, such as sorting by operator, etc.

The hyperlinks that will be downloaded will still work in the Excel spreadsheet. An example is attached below.

---

<div class="post-metadata">

### Author: ![system](https://www.mineralrightsforum.com/uploads/db5755/original/3X/6/c/6c7c56608c843272ad6e3662ce9562a5956f173e.png) [@system](https://www.mineralrightsforum.com/u/system)
#### Post date: [August 15, 2018, 3:58am UTC](https://www.mineralrightsforum.com/t/new-to-forum-reeves-county/22056/4 "2018-08-15T03:58:10Z")

</div>