# New permits loving county

**URL:** https://www.mineralrightsforum.com/t/new-permits-loving-county/9677
**Category:** Oil and Gas Leasing Help
**Created:** [August 7, 2014, 5:00pm UTC](https://www.mineralrightsforum.com/t/new-permits-loving-county/9677 "2014-08-07T17:00:00Z")
**Posts on this page:** 13
**Page:** 1

<div class="post-metadata">

### Author: ![William\_Browne](https://www.mineralrightsforum.com/user_avatar/www.mineralrightsforum.com/william_browne/32/1320_2.png) [@William\_Browne](https://www.mineralrightsforum.com/u/William_Browne)
#### Post date: [August 7, 2014, 5:00pm UTC](https://www.mineralrightsforum.com/t/new-permits-loving-county/9677/1 "2014-08-07T17:00:00Z")

</div>

We just got our permit for Block 33-95 so now to wait for the money. How long does that take?

---

<div class="post-metadata">

### Author: ![Clint\_Liles](https://www.mineralrightsforum.com/user_avatar/www.mineralrightsforum.com/clint_liles/32/16995_2.png) [@Clint\_Liles](https://www.mineralrightsforum.com/u/Clint_Liles)
#### Post date: [August 8, 2014, 4:13am UTC](https://www.mineralrightsforum.com/t/new-permits-loving-county/9677/2 "2014-08-08T04:13:17Z")

</div>

William,

You’re asking an impossible question.

---

<div class="post-metadata">

### Author: ![Patrick4](https://www.mineralrightsforum.com/letter_avatar_proxy/v4/letter/p/eb9ed0/32.png) [@Patrick4](https://www.mineralrightsforum.com/u/Patrick4)
#### Post date: [August 8, 2014, 5:20pm UTC](https://www.mineralrightsforum.com/t/new-permits-loving-county/9677/3 "2014-08-08T17:20:59Z")

</div>

Permit does not equal money. A permit doesn’t necessarily mean that a well will be drilled. If they do drill a well and it’s productive, you’d have to wait roughly 6 months or so after the well is spud to see your first check, and that’s if there’s no delays. Clint is right that your question is very difficult to answer. Good luck.

---

<div class="post-metadata">

### Author: ![William\_Browne](https://www.mineralrightsforum.com/user_avatar/www.mineralrightsforum.com/william_browne/32/1320_2.png) [@William\_Browne](https://www.mineralrightsforum.com/u/William_Browne)
#### Post date: [August 8, 2014, 5:31pm UTC](https://www.mineralrightsforum.com/t/new-permits-loving-county/9677/4 "2014-08-08T17:31:41Z")

</div>

Well they have poured the pad and have told us 3 wells and our section is in a good place for long fracking and I’m sure that will turn into money.

Patrick said:

Permit does not equal money. A permit doesn’t necessarily mean that a well will be drilled. If they do drill a well and it’s productive, you’d have to wait roughly 6 months or so after the well is spud to see your first check, and that’s if there’s no delays. Clint is right that your question is very difficult to answer. Good luck.

---

<div class="post-metadata">

### Author: ![J\_Michal](https://www.mineralrightsforum.com/letter_avatar_proxy/v4/letter/j/ad7895/32.png) [@J\_Michal](https://www.mineralrightsforum.com/u/J_Michal)
#### Post date: [August 8, 2014, 5:40pm UTC](https://www.mineralrightsforum.com/t/new-permits-loving-county/9677/5 "2014-08-08T17:40:35Z")

</div>

William, don’t go spending that money just yet…it’s been over two years since some of our wells were permitted and others have been drilled but not fracked and have been shut-in for over a year now. I just hope I live long enough to see some of that money…someday… 🙂

---

<div class="post-metadata">

### Author: ![William\_Browne](https://www.mineralrightsforum.com/user_avatar/www.mineralrightsforum.com/william_browne/32/1320_2.png) [@William\_Browne](https://www.mineralrightsforum.com/u/William_Browne)
#### Post date: [August 8, 2014, 5:57pm UTC](https://www.mineralrightsforum.com/t/new-permits-loving-county/9677/6 "2014-08-08T17:57:02Z")

</div>

I know better than to spend money I don’t have. We did get oil from this section back in 1985. I can’t understand the thinking of getting all the pre work done and sitting on it for 2 years or more. I hope I live long enough to see it also but from what the land man told us they’re going to drill very soon. So we wait, I have waited 25 plus years for this.

J. Michal said:

William, don’t go spending that money just yet…it’s been over two years since some of our wells were permitted and others have been drilled but not fracked and have been shut-in for over a year now. I just hope I live long enough to see some of that money…someday… 🙂

---

<div class="post-metadata">

### Author: ![joe\_spence](https://www.mineralrightsforum.com/user_avatar/www.mineralrightsforum.com/joe_spence/32/4607_2.png) [@joe\_spence](https://www.mineralrightsforum.com/u/joe_spence)
#### Post date: [August 9, 2014, 12:31am UTC](https://www.mineralrightsforum.com/t/new-permits-loving-county/9677/7 "2014-08-09T00:31:16Z")

</div>

Hope you don’t have to wait too long. I had a well drilled by Anadarko in Oct 2012 and received a check in Feb 2013. The well is in Loving County Sec 1.

---

<div class="post-metadata">

### Author: ![William\_Browne](https://www.mineralrightsforum.com/user_avatar/www.mineralrightsforum.com/william_browne/32/1320_2.png) [@William\_Browne](https://www.mineralrightsforum.com/u/William_Browne)
#### Post date: [August 9, 2014, 1:21am UTC](https://www.mineralrightsforum.com/t/new-permits-loving-county/9677/8 "2014-08-09T01:21:52Z")

</div>

That’s not too bad, 4 months. What was the oil output? How many barrels are they getting from the Loving County wells?

---

<div class="post-metadata">

### Author: ![joe\_spence](https://www.mineralrightsforum.com/user_avatar/www.mineralrightsforum.com/joe_spence/32/4607_2.png) [@joe\_spence](https://www.mineralrightsforum.com/u/joe_spence)
#### Post date: [August 9, 2014, 7:42pm UTC](https://www.mineralrightsforum.com/t/new-permits-loving-county/9677/9 "2014-08-09T19:42:11Z")

</div>

Potential rated at 600 but proration limited to 275, obviously wells vary depending on location and other factors.

---

<div class="post-metadata">

### Author: ![William\_Browne](https://www.mineralrightsforum.com/user_avatar/www.mineralrightsforum.com/william_browne/32/1320_2.png) [@William\_Browne](https://www.mineralrightsforum.com/u/William_Browne)
#### Post date: [August 9, 2014, 11:26pm UTC](https://www.mineralrightsforum.com/t/new-permits-loving-county/9677/10 "2014-08-09T23:26:54Z")

</div>

Yes, I know location has a lot to do with output. I don’t understand your saying rated at 600 but proration limited to 275. What proration? If the well puts out more than 275 a day don’t you get that amount credited to your account? Thank you for the information, I’m new to all this.

joe spence said:

> potential rated at 600 but proration limited to 275, obviously wells vary depending on location and other factors

---

<div class="post-metadata">

### Author: ![joe\_spence](https://www.mineralrightsforum.com/user_avatar/www.mineralrightsforum.com/joe_spence/32/4607_2.png) [@joe\_spence](https://www.mineralrightsforum.com/u/joe_spence)
#### Post date: [August 10, 2014, 12:51am UTC](https://www.mineralrightsforum.com/t/new-permits-loving-county/9677/11 "2014-08-10T00:51:26Z")

</div>

Look up oil proration under Texas oil and gas regulations to get a precise definition. I don’t want to lead you astray.

---

<div class="post-metadata">

### Author: ![William\_Browne](https://www.mineralrightsforum.com/user_avatar/www.mineralrightsforum.com/william_browne/32/1320_2.png) [@William\_Browne](https://www.mineralrightsforum.com/u/William_Browne)
#### Post date: [August 10, 2014, 1:18am UTC](https://www.mineralrightsforum.com/t/new-permits-loving-county/9677/12 "2014-08-10T01:18:09Z")

</div>

OK Thanks.

joe spence said:

> Look up oil proration under Texas oil and gas regulations to get a precise definition. I don’t want to lead you astray.

---

<div class="post-metadata">

### Author: ![system](https://www.mineralrightsforum.com/uploads/db5755/original/3X/6/c/6c7c56608c843272ad6e3662ce9562a5956f173e.png) [@system](https://www.mineralrightsforum.com/u/system)
#### Post date: [August 15, 2018, 12:25am UTC](https://www.mineralrightsforum.com/t/new-permits-loving-county/9677/13 "2018-08-15T00:25:41Z")

</div>


