# Locating wells, production & producers
**URL:** https://www.mineralrightsforum.com/t/locating-wells-production-producers/60476
**Category:** Carter County, OK
**Created:** [February 4, 2021, 9:31pm UTC](https://www.mineralrightsforum.com/t/locating-wells-production-producers/60476 "2021-02-04T21:31:32Z")
**Posts on this page:** 9
**Page:** 1
### Author:  [@L\_Tucker](https://www.mineralrightsforum.com/u/L_Tucker)
#### Post date: [February 4, 2021, 9:31pm UTC](https://www.mineralrightsforum.com/t/locating-wells-production-producers/60476/1 "2021-02-04T21:31:33Z")
Where can I find well production and current producers online for wells in Carter County? I have division orders from 4 companies involving 13 wells, however royalty payments have stopped in the past 12 to 18 months.
---
### Author:  [@M\_Barnes](https://www.mineralrightsforum.com/u/M_Barnes)
#### Post date: [February 4, 2021, 9:35pm UTC](https://www.mineralrightsforum.com/t/locating-wells-production-producers/60476/2 "2021-02-04T21:35:04Z")
'[Gross Production](https://otcportal.tax.ok.gov/gpx/gp_displayPublicPUNListSearchDownload.php) (take off the apostrophe at the beginning) It has the last “12” months of production and usually runs about 4-5 months behind. You may have to search by bottom hole location.
Check your Division Orders to see what your minimum is. Many are set at $100 which you can reset to $25. With prices so low during the summer, some companies shut in or cut back chokes on wells, so the revenue was much lower and may not have hit the limit.
---
### Author:  [@L\_Tucker](https://www.mineralrightsforum.com/u/L_Tucker)
#### Post date: [February 4, 2021, 10:55pm UTC](https://www.mineralrightsforum.com/t/locating-wells-production-producers/60476/3 "2021-02-04T22:55:40Z")
Thank you Ms. Barnes. I’m pretty much a self taught novice with this. None of my paperwork shows a PUD # so where would that be found? Is there a way to search for well by their name, section, township and range? I’m trying to determine if some wells have gone to other companies and I was never notified with new DO’s.
---
### Author:  [@M\_Barnes](https://www.mineralrightsforum.com/u/M_Barnes)
#### Post date: [February 5, 2021, 12:06am UTC](https://www.mineralrightsforum.com/t/locating-wells-production-producers/60476/4 "2021-02-05T00:06:20Z")
If you use the link I listed above, it will give you the PUD number. You can search by well name or by S-T-R. Also, if you are lucky, the completion report will sometimes have it on the newer wells. The completion report can be found in the OCC wellrecords site. [https://imaging.occ.ok.gov/imaging/OGWellRecords.aspx](https://imaging.occ.ok.gov/imaging/OGWellRecords.aspx)
Search the OCC records by the surface location. Search the OTC by the bottom hole location. Not sure why, but seems to work better that way. OCC Wellrecords site: The 1002A form is the completion form 1073 is the Change of Operator Form. The OTC tax site seems to be a bit slower on the change of operator showing up.
---
### Author:  [@Donald\_Cunningham](https://www.mineralrightsforum.com/u/Donald_Cunningham)
#### Post date: [February 12, 2021, 3:18pm UTC](https://www.mineralrightsforum.com/t/locating-wells-production-producers/60476/5 "2021-02-12T15:18:20Z")
Does anyone have details on the Camino Wild Bill well in Sections 6 & 7, 1-S 3-W? Depth, formation, other details? Same formation as The Flash? Thanks
---
### Author:  [@M\_Barnes](https://www.mineralrightsforum.com/u/M_Barnes)
#### Post date: [February 12, 2021, 4:03pm UTC](https://www.mineralrightsforum.com/t/locating-wells-production-producers/60476/6 "2021-02-12T16:03:10Z")
You can find the permit on the OCC wellrecords site. [https://imaging.occ.ok.gov/OG/Well%20Records/1DDB8110.pdf](https://imaging.occ.ok.gov/OG/Well%20Records/1DDB8110.pdf)
---
### Author:  [@TODD\_M\_Baker](https://www.mineralrightsforum.com/u/TODD_M_Baker)
#### Post date: [February 12, 2021, 11:33pm UTC](https://www.mineralrightsforum.com/t/locating-wells-production-producers/60476/7 "2021-02-12T23:33:51Z")
There is no notice of spud yet, so nothing to report other than M\_Barnes giving you the intent to drill. It doesn’t mean the well will be drilled.
---
### Author:  [@M\_Barnes](https://www.mineralrightsforum.com/u/M_Barnes)
#### Post date: [February 12, 2021, 11:43pm UTC](https://www.mineralrightsforum.com/t/locating-wells-production-producers/60476/8 "2021-02-12T23:43:57Z")
Correct. The latest document is a permit. Never any guarantees. You can look up the other well on the same website and compare its intended target.
---
### Author:  [@system](https://www.mineralrightsforum.com/u/system)
#### Post date: [May 5, 2021, 9:32pm UTC](https://www.mineralrightsforum.com/t/locating-wells-production-producers/60476/9 "2021-05-05T21:32:02Z")
This topic was automatically closed after 90 days. New replies are no longer allowed.