# Identifying Wells in a Unit

**URL:** https://www.mineralrightsforum.com/t/identifying-wells-in-a-unit/70797
**Category:** Kingfisher County, OK
**Created:** [May 5, 2023, 8:29pm UTC](https://www.mineralrightsforum.com/t/identifying-wells-in-a-unit/70797 "2023-05-05T20:29:17Z")
**Posts on this page:** 6
**Page:** 1

<div class="post-metadata">

### Author: ![mthornell](https://www.mineralrightsforum.com/user_avatar/www.mineralrightsforum.com/mthornell/32/13468_2.png) [@mthornell](https://www.mineralrightsforum.com/u/mthornell)
#### Post date: [May 5, 2023, 8:29pm UTC](https://www.mineralrightsforum.com/t/identifying-wells-in-a-unit/70797/1 "2023-05-05T20:29:17Z")

</div>

What is the best resource to determine which wells are included in a Unit?

---

<div class="post-metadata">

### Author: ![M\_Barnes](https://www.mineralrightsforum.com/user_avatar/www.mineralrightsforum.com/m_barnes/32/10942_2.png) [@M\_Barnes](https://www.mineralrightsforum.com/u/M_Barnes)
#### Post date: [May 5, 2023, 9:10pm UTC](https://www.mineralrightsforum.com/t/identifying-wells-in-a-unit/70797/2 "2023-05-05T21:10:02Z")

</div>

You need to be a bit more specific. The word Unit is used in several different ways. Some wells have the word “unit” in the name, but only one well is in the spacing. Other wells are included in a Water Flood Unit. Those units can be looked up at the OCC.

---

<div class="post-metadata">

### Author: ![mthornell](https://www.mineralrightsforum.com/user_avatar/www.mineralrightsforum.com/mthornell/32/13468_2.png) [@mthornell](https://www.mineralrightsforum.com/u/mthornell)
#### Post date: [May 5, 2023, 10:24pm UTC](https://www.mineralrightsforum.com/t/identifying-wells-in-a-unit/70797/3 "2023-05-05T22:24:52Z")

</div>

Thank you. These are oil and gas wells. Specifically in Kingfisher County, OK, SE4, Section 30-18N-6W.

---

<div class="post-metadata">

### Author: ![M\_Barnes](https://www.mineralrightsforum.com/user_avatar/www.mineralrightsforum.com/m_barnes/32/10942_2.png) [@M\_Barnes](https://www.mineralrightsforum.com/u/M_Barnes)
#### Post date: [May 6, 2023, 12:02am UTC](https://www.mineralrightsforum.com/t/identifying-wells-in-a-unit/70797/4 "2023-05-06T00:02:57Z")

</div>

You can look up the surface locations on the OCC wellrecords site. [https://imaging.occ.ok.gov/imaging/OGWellRecords.aspx](https://imaging.occ.ok.gov/imaging/OGWellRecords.aspx) the location box shows those wells in the SE4. You need to check the permits (Form 1000) to see if other wells in the section may also be in a spacing with SE4.  
Form 1001A is spud, Form 1002A is the completion. Form 1003 is plugging. Form 1073 is change of operator. The three horizontal wells are spaced at 640 so hold the SE 4 at their reservoir(s).

---

<div class="post-metadata">

### Author: ![mthornell](https://www.mineralrightsforum.com/user_avatar/www.mineralrightsforum.com/mthornell/32/13468_2.png) [@mthornell](https://www.mineralrightsforum.com/u/mthornell)
#### Post date: [May 19, 2023, 9:37pm UTC](https://www.mineralrightsforum.com/t/identifying-wells-in-a-unit/70797/5 "2023-05-19T21:37:43Z")

</div>

Thank you for the information.

---

<div class="post-metadata">

### Author: ![system](https://www.mineralrightsforum.com/uploads/db5755/original/3X/6/c/6c7c56608c843272ad6e3662ce9562a5956f173e.png) [@system](https://www.mineralrightsforum.com/u/system)
#### Post date: [August 3, 2023, 8:29pm UTC](https://www.mineralrightsforum.com/t/identifying-wells-in-a-unit/70797/6 "2023-08-03T20:29:34Z")

</div>

This topic was automatically closed after 90 days. New replies are no longer allowed.
