# Free Royalty and Leasing
**URL:** https://www.mineralrightsforum.com/t/free-royalty-and-leasing/82644
**Category:** Anderson County, TX
**Created:** [July 27, 2025, 6:20pm UTC](https://www.mineralrightsforum.com/t/free-royalty-and-leasing/82644 "2025-07-27T18:20:41Z")
**Posts on this page:** 6
**Page:** 1
### Author:  [@Mineral\_Owner5](https://www.mineralrightsforum.com/u/Mineral_Owner5)
#### Post date: [July 27, 2025, 6:20pm UTC](https://www.mineralrightsforum.com/t/free-royalty-and-leasing/82644/1 "2025-07-27T18:20:41Z")
If a company “A” that plans to drill only offers a 1/5 and no “cost free royalty” for a lease for a horizontal well. Then company “B” leases these minerals for a 1/4 and grants a "cost free royalty. Then company “A” drills a horizontal well and company “B’s” lease is included in the horizontal unit. What will company “A” have to pay and abide by?
---
### Author:  [@TennisDaze](https://www.mineralrightsforum.com/u/TennisDaze)
#### Post date: [July 27, 2025, 8:21pm UTC](https://www.mineralrightsforum.com/t/free-royalty-and-leasing/82644/2 "2025-07-27T20:21:02Z")
You would be due royalties under the terms of your lease B. If B has retained the lease and participated in the well as a non-op WI, then A will pay properly and charge that against B’s working interest. If B has assigned the lease to A, then A will be bound to the lease terms. There is a lot of discussion on various threads here about adding ‘cost-free royalty’ language in leases. It is important to be sure that the entire royalty clause is properly written to make the cost-free language effective, i.e. not proceeds or market value at the well.
---
### Author:  [@Mineral\_Owner5](https://www.mineralrightsforum.com/u/Mineral_Owner5)
#### Post date: [July 27, 2025, 8:40pm UTC](https://www.mineralrightsforum.com/t/free-royalty-and-leasing/82644/3 "2025-07-27T20:40:51Z")
Is there a foolproof “Cost Free Royalty” language in a lease in Texas?
---
### Author:  [@Rock\_Man](https://www.mineralrightsforum.com/u/Rock_Man)
#### Post date: [July 27, 2025, 8:56pm UTC](https://www.mineralrightsforum.com/t/free-royalty-and-leasing/82644/4 "2025-07-27T20:56:35Z")
There are some very good leases that address “cost free” language. Best way to ensure getting the best lease possible is to work with an experienced O&G lawyer who has expertise in such contracts.
Even with a “cost free” lease, one needs to stay on top of any monthly revenue checks to see if the lease terms are being honored and no deductions are being made.
I personally experienced this with a major operator in the Permian Basin who had been deducting expenses for years even though the original lease was clearly “cost free”. I ended up having to contact the operator (on behalf of my client) to get a refund for all the deductions.
Total refund was in the six figures.
Side note - consider adding a lease clause that pays you for “flared gas”. No sense seeing royalty money being burned up when you can get paid for any flaring.
---
### Author:  [@Rock\_Man](https://www.mineralrightsforum.com/u/Rock_Man)
#### Post date: [July 27, 2025, 11:03pm UTC](https://www.mineralrightsforum.com/t/free-royalty-and-leasing/82644/5 "2025-07-27T23:03:32Z")
Royalty percentage is pure proportional math - take each lease (net acres total) as a percentage of the overall production unit and then calculate that percentage @ one royalty (e.g. 20%). Do this across the unit to get final royalty percentage.
As for the “cost free royalty” issue, same situation. e.g. if 50% of the unit is “cost free”, 50% of the production/revenue will not be subject to various deductions. While the other acreage with no cost-free clause will be paying a proportionate share of those deductions.
---
### Author:  [@system](https://www.mineralrightsforum.com/u/system)
#### Post date: [October 25, 2025, 6:20pm UTC](https://www.mineralrightsforum.com/t/free-royalty-and-leasing/82644/6 "2025-10-25T18:20:58Z")
This topic was automatically closed after 90 days. New replies are no longer allowed.