# Exhibit Plat attached to Application
**URL:** https://www.mineralrightsforum.com/t/exhibit-plat-attached-to-application/42531
**Category:** General Mineral Rights Discussion
**Created:** [March 4, 2019, 5:41am UTC](https://www.mineralrightsforum.com/t/exhibit-plat-attached-to-application/42531 "2019-03-04T05:41:03Z")
**Posts on this page:** 3
**Page:** 1
### Author:  [@Holly\_Garcia](https://www.mineralrightsforum.com/u/Holly_Garcia)
#### Post date: [March 4, 2019, 5:41am UTC](https://www.mineralrightsforum.com/t/exhibit-plat-attached-to-application/42531/1 "2019-03-04T05:41:03Z")
On Application: Attached to this application and marked as Exhibit “B” is a plat showing drilling and spacing units requested, together with any drilling and spacing units abutting or overlapping the lands within said section.
My question is, on the plat exhibit it shows the Section, Township, Range of my minerals and then numbers: (4) (7) (18) (21) (22) (32). What do these numbers represent?
---
### Author:  [@M\_Barnes](https://www.mineralrightsforum.com/u/M_Barnes)
#### Post date: [March 4, 2019, 2:51pm UTC](https://www.mineralrightsforum.com/t/exhibit-plat-attached-to-application/42531/2 "2019-03-04T14:51:35Z")
Not being able to see it, my guess is that there is an additional page of information that will explain what those mean. Usually an older spacing that tells which other zones are already spaced by a different order.
---
### Author:  [@MRFAdmin\_SV](https://www.mineralrightsforum.com/u/MRFAdmin_SV)
#### Post date: [January 11, 2025, 7:19pm UTC](https://www.mineralrightsforum.com/t/exhibit-plat-attached-to-application/42531/3 "2025-01-11T19:19:30Z")