# Estimating recovery of a reservoir
**URL:** https://www.mineralrightsforum.com/t/estimating-recovery-of-a-reservoir/32085
**Category:** Blaine County, OK
**Created:** [August 21, 2018, 2:14am UTC](https://www.mineralrightsforum.com/t/estimating-recovery-of-a-reservoir/32085 "2018-08-21T02:14:14Z")
**Posts on this page:** 15
**Page:** 1
### Author:  [@Marc\_B](https://www.mineralrightsforum.com/u/Marc_B)
#### Post date: [August 21, 2018, 2:14am UTC](https://www.mineralrightsforum.com/t/estimating-recovery-of-a-reservoir/32085/1 "2018-08-21T02:14:15Z")
Is there a standard recovery factor for reservoirs in Blaine County? I have seen 10, 20, and 30% recently. Or does it all depend on the exact location?
---
### Author:  [@TODD\_M\_Baker](https://www.mineralrightsforum.com/u/TODD_M_Baker)
#### Post date: [August 21, 2018, 2:26am UTC](https://www.mineralrightsforum.com/t/estimating-recovery-of-a-reservoir/32085/2 "2018-08-21T02:26:55Z")
Marc:
All reservoirs (formations) are different. In a very general sense, 10% recovery is a pretty realistic number for most reservoirs. All the shale formations are considered tight formations and will traditionally yield less. That is why so many wells are required to recover the hydrocarbons present.
---
### Author:  [@Marc\_B](https://www.mineralrightsforum.com/u/Marc_B)
#### Post date: [August 21, 2018, 2:40am UTC](https://www.mineralrightsforum.com/t/estimating-recovery-of-a-reservoir/32085/3 "2018-08-21T02:40:59Z")
Ok, I’m just noticing some sections or areas they are asking for more additional density wells than another section even though the other section shows less reserves. I’m sure there is a lot more to it and with time it all evens out, but it just struck me as odd to see the different number of wells being asked for.
Thanks Marc
---
### Author:  [@TODD\_M\_Baker](https://www.mineralrightsforum.com/u/TODD_M_Baker)
#### Post date: [August 21, 2018, 2:49am UTC](https://www.mineralrightsforum.com/t/estimating-recovery-of-a-reservoir/32085/4 "2018-08-21T02:49:16Z")
Different numbers in adjacent sections “usually” happen because of the differences in thickness of the formation that is under review. There are other factors like porosity and permeability that are different throughout the reservoir. You have heard the term “sweet spot”? That is when you have all the good things occurring at the same time in a certain location. The acreage next door may not have all of those same things.
---
### Author:  [@JOHN\_MORAN](https://www.mineralrightsforum.com/u/JOHN_MORAN)
#### Post date: [August 21, 2018, 3:50am UTC](https://www.mineralrightsforum.com/t/estimating-recovery-of-a-reservoir/32085/5 "2018-08-21T03:50:46Z")
Yep, with the sophisticated equipment of today they can somewhat estimate what is down there and where and how many wells it will take for maximum recovery. In our section they figure it will take 9 wells, I see in some others they estimate 16+. Depends on pool, formation, density, and I’m sure many other things are taken into consideration.
---
### Author:  [@Marc\_B](https://www.mineralrightsforum.com/u/Marc_B)
#### Post date: [August 21, 2018, 4:15am UTC](https://www.mineralrightsforum.com/t/estimating-recovery-of-a-reservoir/32085/6 "2018-08-21T04:15:21Z")
It seems like there is still a bit of art mixed in with the science. I am also amazed the recovery rate is so low. This should make the future look very bright as the technology improves.
Marc
---
### Author:  [@M\_Barnes](https://www.mineralrightsforum.com/u/M_Barnes)
#### Post date: [August 21, 2018, 3:11pm UTC](https://www.mineralrightsforum.com/t/estimating-recovery-of-a-reservoir/32085/7 "2018-08-21T15:11:29Z")
If you want to see some very good visual representations about the density of wells in Blaine, look up the most recent investor presentations from Continental Resources, Newfield, Marathon and Gastar to mention just a few. Blaine has at least five different shale reservoirs with different geologic properties. Some are economic now, some need higher prices. The density has to do with many factors including thickness, areal extent of the different reservoir, economics, rig availability and financing, etc.
I just went to the Unconventional Resources Technology Conference in Houston a few weeks ago. Horizontal recoveries a few years ago ranged from 4-7%. Now, they are hugging 10% as mentioned above. Lots of room for improvement with better technology along the way. Quite a bit of research going into enhanced recovery, Carbon capture, etc. Excited about the future.
---
### Author:  [@Lanny\_Edward\_Sells](https://www.mineralrightsforum.com/u/Lanny_Edward_Sells)
#### Post date: [August 26, 2018, 2:01am UTC](https://www.mineralrightsforum.com/t/estimating-recovery-of-a-reservoir/32085/8 "2018-08-26T02:01:02Z")
I am wondering about how long well completion units are onsite to do the fracking, etc., on a two section well in Blaine County?
---
### Author:  [@Paul\_Edsall](https://www.mineralrightsforum.com/u/Paul_Edsall)
#### Post date: [August 26, 2018, 2:48am UTC](https://www.mineralrightsforum.com/t/estimating-recovery-of-a-reservoir/32085/9 "2018-08-26T02:48:46Z")
From what I’ve observed 10 to 14 days and longer if they have problems.
---
### Author:  [@Paul\_Edsall](https://www.mineralrightsforum.com/u/Paul_Edsall)
#### Post date: [August 26, 2018, 3:26pm UTC](https://www.mineralrightsforum.com/t/estimating-recovery-of-a-reservoir/32085/10 "2018-08-26T15:26:17Z")
I should further say that after the fracking process it takes a few days to clean up site and to hook up the production & testing equipment. They normally test around 30 days. Production normally starts the first day of testing.
---
### Author:  [@Lanny\_Edward\_Sells](https://www.mineralrightsforum.com/u/Lanny_Edward_Sells)
#### Post date: [August 26, 2018, 6:52pm UTC](https://www.mineralrightsforum.com/t/estimating-recovery-of-a-reservoir/32085/11 "2018-08-26T18:52:13Z")
Thanks Paul, Derby is supposed to come in soon just East of Canton, and complete the Pioneer 3\_34-18N-13W.
---
### Author:  [@M\_Barnes](https://www.mineralrightsforum.com/u/M_Barnes)
#### Post date: [August 26, 2018, 11:14pm UTC](https://www.mineralrightsforum.com/t/estimating-recovery-of-a-reservoir/32085/12 "2018-08-26T23:14:50Z")
> **[Fracking 101: Breaking down the most important part of today’s oil, gas...](https://www.greeleytribune.com/news/fracking-101-breaking-down-the-most-important-part-of-todays-oil-gas-drilling/)**
>
> The two- to three-day process of hydraulic fracturing for oil and gas is perhaps one of the most misunderstood drilling practices, becoming as bad of a word in some
Here is a really good description of frac’ing. It takes a bit longer than this describes if the well is a two section well as more stages are required. Also takes longer if they are doing a zipper frac of several wells. Good for a basic explanation though.
---
### Author:  [@Susie\_Jernigan](https://www.mineralrightsforum.com/u/Susie_Jernigan)
#### Post date: [August 27, 2018, 2:06pm UTC](https://www.mineralrightsforum.com/t/estimating-recovery-of-a-reservoir/32085/13 "2018-08-27T14:06:12Z")
Thanks, Martha. Really appreciate this.
---
### Author:  [@Lanny\_Edward\_Sells](https://www.mineralrightsforum.com/u/Lanny_Edward_Sells)
#### Post date: [August 27, 2018, 2:20pm UTC](https://www.mineralrightsforum.com/t/estimating-recovery-of-a-reservoir/32085/14 "2018-08-27T14:20:57Z")
Yes, thanks Martha, that’s an easy read and clears some misconceptions up.
---
### Author:  [@MRFAdmin\_SV](https://www.mineralrightsforum.com/u/MRFAdmin_SV)
#### Post date: [January 11, 2025, 6:19pm UTC](https://www.mineralrightsforum.com/t/estimating-recovery-of-a-reservoir/32085/15 "2025-01-11T18:19:40Z")