# Division orders 2N 2W
**URL:** https://www.mineralrightsforum.com/t/division-orders-2n-2w/32310
**Category:** Garvin County, OK
**Created:** [August 24, 2018, 12:55am UTC](https://www.mineralrightsforum.com/t/division-orders-2n-2w/32310 "2018-08-24T00:55:16Z")
**Posts on this page:** 20
**Page:** 1
### Author:  [@Darla\_Charlow\_Ragland](https://www.mineralrightsforum.com/u/Darla_Charlow_Ragland)
#### Post date: [August 24, 2018, 12:55am UTC](https://www.mineralrightsforum.com/t/division-orders-2n-2w/32310/1 "2018-08-24T00:55:17Z")
Has anyone received their division orders from Rimrock on the Jennie 1-21H in Section 21, Township 2N, Range 2W or the John Kent 1-21-16H in Sections 16 and 21, Township 2N, Range 2W? I have small interests, but you would think that they would have gotten the one on the Jennie out already. I show first production in April.
---
### Author:  [@M\_Barnes](https://www.mineralrightsforum.com/u/M_Barnes)
#### Post date: [August 24, 2018, 1:08am UTC](https://www.mineralrightsforum.com/t/division-orders-2n-2w/32310/2 "2018-08-24T01:08:17Z")
Darla, They usually don’t get them sent out until about five months after first production, especially with the two section wells due to the extra volume of owners in two sections versus one section. There are at least 429 respondents to the John Kent well. That is a whole lot of title searching to do!
---
### Author:  [@Darla\_Charlow\_Ragland](https://www.mineralrightsforum.com/u/Darla_Charlow_Ragland)
#### Post date: [August 24, 2018, 1:43am UTC](https://www.mineralrightsforum.com/t/division-orders-2n-2w/32310/3 "2018-08-24T01:43:48Z")
Martha, I guess I should have said first sales on the Jennie were in October and six months would have been April. Yes, I have ran title in these sections… it’s horrible.
---
### Author:  [@M\_Barnes](https://www.mineralrightsforum.com/u/M_Barnes)
#### Post date: [August 24, 2018, 12:33pm UTC](https://www.mineralrightsforum.com/t/division-orders-2n-2w/32310/4 "2018-08-24T12:33:19Z")
12% on the Jennie for clear title folks!
---
### Author:  [@KENTG](https://www.mineralrightsforum.com/u/KENTG)
#### Post date: [August 24, 2018, 2:54pm UTC](https://www.mineralrightsforum.com/t/division-orders-2n-2w/32310/5 "2018-08-24T14:54:25Z")
Hello Martha, I have a net 40 in Section 16 under the John-Kent. I have not received any division orders yet either. The first production was mid-February; shouldn’t I have received orders by now? I get no response from Rimrock.
---
### Author:  [@Darla\_Charlow\_Ragland](https://www.mineralrightsforum.com/u/Darla_Charlow_Ragland)
#### Post date: [August 24, 2018, 3:36pm UTC](https://www.mineralrightsforum.com/t/division-orders-2n-2w/32310/6 "2018-08-24T15:36:54Z")
KentG, thanks for responding. Now I know I am not the only one. Rimrock isn’t responding to my emails or calls. I have sent all updated ownerships certified because they wouldn’t even confirm receipt of them being sent by email. I think they drilled too many wells too fast and are now behind on all their title work. They should be getting them out anytime… but the Jennie is an older well and they still haven’t gotten those out.
---
### Author:  [@M\_Barnes](https://www.mineralrightsforum.com/u/M_Barnes)
#### Post date: [August 24, 2018, 3:48pm UTC](https://www.mineralrightsforum.com/t/division-orders-2n-2w/32310/7 "2018-08-24T15:48:24Z")
Probably won’t get a Division Order until September or later on the John Kent. They have hundreds (at least 429 titles to go through). You will get statutory interest though!
---
### Author:  [@KENTG](https://www.mineralrightsforum.com/u/KENTG)
#### Post date: [August 24, 2018, 4:00pm UTC](https://www.mineralrightsforum.com/t/division-orders-2n-2w/32310/8 "2018-08-24T16:00:56Z")
Darla, you are probably right. I have received intent to drill on three more sections I have in the area and a request for increased density for the John-Kent from Rimrock. Martha, I was thinking they had to start paying interest six months after first production. Good to get verification.
---
### Author:  [@Frank\_Pfisch](https://www.mineralrightsforum.com/u/Frank_Pfisch)
#### Post date: [August 24, 2018, 8:13pm UTC](https://www.mineralrightsforum.com/t/division-orders-2n-2w/32310/9 "2018-08-24T20:13:04Z")
On some wells Rimrock sent run checks before they sent division orders.
Go figure.
---
### Author:  [@KENTG](https://www.mineralrightsforum.com/u/KENTG)
#### Post date: [August 24, 2018, 8:30pm UTC](https://www.mineralrightsforum.com/t/division-orders-2n-2w/32310/10 "2018-08-24T20:30:08Z")
Seems strange, but with the initial production numbers guessing some of the checks could be large. I am sure they don’t want to be paying interest. Thanks Frank.
---
### Author:  [@SPaulC](https://www.mineralrightsforum.com/u/SPaulC)
#### Post date: [August 24, 2018, 10:55pm UTC](https://www.mineralrightsforum.com/t/division-orders-2n-2w/32310/11 "2018-08-24T22:55:30Z")
First time poster on this forum. I have a question. Based on the plat attached to the John Kent 1-21-16UWH OCC Completion Report, the well also includes a portion of Section 28 Township 2 North Range 2 West as well as Sections 16 & 21. Is this correct and if so, does the Unit include 3 full sections? By the way, earlier this month I received a division order from Rimrock and royalty payment the same day.
---
### Author:  [@M\_Barnes](https://www.mineralrightsforum.com/u/M_Barnes)
#### Post date: [August 24, 2018, 11:16pm UTC](https://www.mineralrightsforum.com/t/division-orders-2n-2w/32310/12 "2018-08-24T23:16:11Z")
The Surface location was in 28, but the final distribution per the OCC order 680917 is based upon the perforations in 16 and 21 only. 16 has 50.0352% and 21 has 49.9648%. Very common to drill the vertical part of the hole and drill the turn in a contiguous section and then only perforate in the sections with the horizontal part of the hole. Get’s more exposure of the reservoir to the well bore in the two primary sections.
---
### Author:  [@SPaulC](https://www.mineralrightsforum.com/u/SPaulC)
#### Post date: [August 25, 2018, 12:38am UTC](https://www.mineralrightsforum.com/t/division-orders-2n-2w/32310/13 "2018-08-25T00:38:58Z")
M\_Barnes…It will be interesting to see what they do with Section 28, which I leased to Rimrock earlier this year. Thanks so much for the great explanation.
---
### Author:  [@M\_Barnes](https://www.mineralrightsforum.com/u/M_Barnes)
#### Post date: [August 25, 2018, 12:52am UTC](https://www.mineralrightsforum.com/t/division-orders-2n-2w/32310/14 "2018-08-25T00:52:17Z")
Rimrock has its own filings on 28. They have a multi unit planned in 28 at 66% and 33 at 34%. Supposed to spud before January 23, 2019 according to the pooling. There are three pads in 28 already, so they may use one of them, or they may use a different one. Looks like it is supposed to be called the Tadlock 1-33-28H. Pretty good reserves listed in the displays. Don’t see a permit yet.
---
### Author:  [@Darla\_Charlow\_Ragland](https://www.mineralrightsforum.com/u/Darla_Charlow_Ragland)
#### Post date: [August 25, 2018, 1:52am UTC](https://www.mineralrightsforum.com/t/division-orders-2n-2w/32310/15 "2018-08-25T01:52:27Z")
SPaulC, was it the John Kent that you received the division order on?
---
### Author:  [@SPaulC](https://www.mineralrightsforum.com/u/SPaulC)
#### Post date: [August 25, 2018, 1:38pm UTC](https://www.mineralrightsforum.com/t/division-orders-2n-2w/32310/16 "2018-08-25T13:38:06Z")
Hi Darla - No, it was the Grimes 1-01-36UWH located in Section 36 Township 2N Range 2W and Section 1 Township 1N Range 2W. Rimrock tells me the lease is HBP based on a 1945 dated lease, so my small interest is subject to a 1/8th royalty.
I inherited mostly very small mineral interests in Garvin, Grady, Stephens & McClain counties and with all of the activity in the SCOOP I decided that I needed to start following things up in Oklahoma more closely. I have been a frequent Forum visitor for the past few months and appreciate all of the great information you provide to folks. I am also starting to find my way around the OCC website…not easy though. Take care.
---
### Author:  [@Frank\_Pfisch](https://www.mineralrightsforum.com/u/Frank_Pfisch)
#### Post date: [December 5, 2018, 12:07am UTC](https://www.mineralrightsforum.com/t/division-orders-2n-2w/32310/17 "2018-12-05T00:07:25Z")
Has anyone else noticed a delay in receiving royalty checks from Newfield and Rimrock due in the month of November 2018? They both claim they mail checks the last day of the month, but it is now the 4th of December.
---
### Author:  [@arkomo](https://www.mineralrightsforum.com/u/arkomo)
#### Post date: [December 5, 2018, 12:44am UTC](https://www.mineralrightsforum.com/t/division-orders-2n-2w/32310/18 "2018-12-05T00:44:27Z")
Frank, XTO did the same thing. Said the checks were printed 11/25 but I didn’t receive it till 12/3. Had me worried!
---
### Author:  [@SPaulC](https://www.mineralrightsforum.com/u/SPaulC)
#### Post date: [December 5, 2018, 2:06am UTC](https://www.mineralrightsforum.com/t/division-orders-2n-2w/32310/19 "2018-12-05T02:06:24Z")
Frank, I am expecting a check from Rimrock for their November revenue distribution, but have not yet received it.
---
### Author:  [@D\_Davis1](https://www.mineralrightsforum.com/u/D_Davis1)
#### Post date: [December 5, 2018, 12:34pm UTC](https://www.mineralrightsforum.com/t/division-orders-2n-2w/32310/20 "2018-12-05T12:34:33Z")
My automatic deposit from Newfield happened on time, last month.
[Next page](https://www.mineralrightsforum.com/t/division-orders-2n-2w/32310.md?page=2)