# Division Order question **URL:** https://www.mineralrightsforum.com/t/division-order-question/39370 **Category:** Division Orders **Created:** [January 2, 2019, 8:38pm UTC](https://www.mineralrightsforum.com/t/division-order-question/39370 "2019-01-02T20:38:51Z") **Posts on this page:** 6 **Page:** 1
### Author: ![Cuazy](https://www.mineralrightsforum.com/letter_avatar_proxy/v4/letter/c/aeb1de/32.png) [@Cuazy](https://www.mineralrightsforum.com/u/Cuazy) #### Post date: [January 2, 2019, 8:38pm UTC](https://www.mineralrightsforum.com/t/division-order-question/39370/1 "2019-01-02T20:38:51Z")
Recently, I received a Division Order for a small tract in Cherokee County and I cannot make the math work. Could someone advise what is recommended to confirm the division order prior to signing? Would welcome a recommendation for a title professional, independent landman, or attorney familiar with the area and O&G leases. Many thanks! ---
### Author: ![Clint\_Liles](https://www.mineralrightsforum.com/user_avatar/www.mineralrightsforum.com/clint_liles/32/16995_2.png) [@Clint\_Liles](https://www.mineralrightsforum.com/u/Clint_Liles) #### Post date: [January 2, 2019, 9:00pm UTC](https://www.mineralrightsforum.com/t/division-order-question/39370/2 "2019-01-02T21:00:50Z")
Cauzy, Personal message sent. ---
### Author: ![M\_Barnes](https://www.mineralrightsforum.com/user_avatar/www.mineralrightsforum.com/m_barnes/32/10942_2.png) [@M\_Barnes](https://www.mineralrightsforum.com/u/M_Barnes) #### Post date: [January 3, 2019, 4:04pm UTC](https://www.mineralrightsforum.com/t/division-order-question/39370/3 "2019-01-03T16:04:07Z")
The equation is as follows: net acres/spacing acres x royalty x % perforations in your section. If the well is completely within one section, then the last term is 1.00. If it is a multi unit well, then the OCC will determine the percentages. You don’t need a professional if you can figure out the terms of the equation. I can help you with the spacing if you tell me which section, township and range and well you are talking about. ---
### Author: ![Dusty1](https://www.mineralrightsforum.com/letter_avatar_proxy/v4/letter/d/7bcc69/32.png) [@Dusty1](https://www.mineralrightsforum.com/u/Dusty1) #### Post date: [January 4, 2019, 4:02am UTC](https://www.mineralrightsforum.com/t/division-order-question/39370/4 "2019-01-04T04:02:39Z")
These folks are in Texas not Oklahoma and no indication it’s a proration unit, right? ---
### Author: ![M\_Barnes](https://www.mineralrightsforum.com/user_avatar/www.mineralrightsforum.com/m_barnes/32/10942_2.png) [@M\_Barnes](https://www.mineralrightsforum.com/u/M_Barnes) #### Post date: [January 4, 2019, 1:42pm UTC](https://www.mineralrightsforum.com/t/division-order-question/39370/5 "2019-01-04T13:42:56Z")
It should say on it if it is a proration. Call the Division Order Analyst. You can also look at the Texas RR Commission to see a plat of the well and see how long it is if horizontal or if it is vertical. Clint Liles is a master at using their website. ---
### Author: ![MRFAdmin\_SV](https://www.mineralrightsforum.com/letter_avatar_proxy/v4/letter/m/e0b2c6/32.png) [@MRFAdmin\_SV](https://www.mineralrightsforum.com/u/MRFAdmin_SV) #### Post date: [January 11, 2025, 7:12pm UTC](https://www.mineralrightsforum.com/t/division-order-question/39370/6 "2025-01-11T19:12:10Z")