# Division Order Question

**URL:** https://www.mineralrightsforum.com/t/division-order-question/11872
**Category:** Oil and Gas Leasing Help
**Created:** [January 17, 2014, 5:45pm UTC](https://www.mineralrightsforum.com/t/division-order-question/11872 "2014-01-17T17:45:43Z")
**Posts on this page:** 10
**Page:** 1

<div class="post-metadata">

### Author: ![Scott\_MacKnight](https://www.mineralrightsforum.com/letter_avatar_proxy/v4/letter/s/848f3c/32.png) [@Scott\_MacKnight](https://www.mineralrightsforum.com/u/Scott_MacKnight)
#### Post date: [January 17, 2014, 5:45pm UTC](https://www.mineralrightsforum.com/t/division-order-question/11872/1 "2014-01-17T17:45:43Z")

</div>

Hi,

I’m new to the group. I’m 1/3 owner of a 1/6 royalty interest on a producing property located in Uintah County, Utah. I just (finally) received a division order from the producer, but I question the decimal interest number they provided. They show a decimal interest number of .048611. As I mentioned, I’m 1/3 owner of a 1/6 interest. By my own calculations, 1/6 interest should be a decimal interest of .16666 and a third of that should be .0555. My lease clearly states that I am owner of 1/3 of the surface and mineral rights. The .048611 number they provided is closer to 1/3 of 1/7. Am I missing something? Should I contact the company, and in what way? I don’t want to unnecessarily delay royalty payments, but that small number could make a large difference over time. BTW, there are 4 other owners besides myself and they each own 1/6 of 1/6. The number they received is .02430, which comes out to exactly half of my interest as it should, but not on 1/6. Thanks so much for any advice or suggestions.

---

<div class="post-metadata">

### Author: ![oldoak](https://www.mineralrightsforum.com/user_avatar/www.mineralrightsforum.com/oldoak/32/3776_2.png) [@oldoak](https://www.mineralrightsforum.com/u/oldoak)
#### Post date: [January 17, 2014, 8:18pm UTC](https://www.mineralrightsforum.com/t/division-order-question/11872/2 "2014-01-17T20:18:36Z")

</div>

Does ‘your’ mineral interest make up 100% of the acres in the unit? If not, then that could explain the additional dilution; for example, if your interest only covers 875 acres in a 1000 acre unit, then that would almost explain the given number exactly.

---

<div class="post-metadata">

### Author: ![Scott\_MacKnight](https://www.mineralrightsforum.com/letter_avatar_proxy/v4/letter/s/848f3c/32.png) [@Scott\_MacKnight](https://www.mineralrightsforum.com/u/Scott_MacKnight)
#### Post date: [January 18, 2014, 2:12am UTC](https://www.mineralrightsforum.com/t/division-order-question/11872/3 "2014-01-18T02:12:10Z")

</div>

We collectively own 115 acres and 100% of the mineral rights on those acres. The producer has created 640-acre drilling units on which they can place 16 wells. Our property at present has 1 producing well with plans for 2 more. As far as I know, all of our 115 acres are contained within the drilling unit… at least they have never notified us differently.

---

<div class="post-metadata">

### Author: ![Linda\_Barbour](https://www.mineralrightsforum.com/letter_avatar_proxy/v4/letter/l/f9ae1b/32.png) [@Linda\_Barbour](https://www.mineralrightsforum.com/u/Linda_Barbour)
#### Post date: [January 18, 2014, 5:32pm UTC](https://www.mineralrightsforum.com/t/division-order-question/11872/4 "2014-01-18T17:32:05Z")

</div>

Depends on how many net mineral acres you own and the size of the spacing.

---

<div class="post-metadata">

### Author: ![r\_w\_kennedy](https://www.mineralrightsforum.com/letter_avatar_proxy/v4/letter/r/3ec8ea/32.png) [@r\_w\_kennedy](https://www.mineralrightsforum.com/u/r_w_kennedy)
#### Post date: [January 19, 2014, 5:16am UTC](https://www.mineralrightsforum.com/t/division-order-question/11872/5 "2014-01-19T05:16:07Z")

</div>

Mr. MacKnight, never expect an oil company to inform you of anything. Legally you are bound to keep a close eye on your interests and the oil company has no duty towards you that is not in state/federal law or in your lease and the government does not keep up with oil companies very well.

---

<div class="post-metadata">

### Author: ![Scott\_Pipkin](https://www.mineralrightsforum.com/letter_avatar_proxy/v4/letter/s/e8c25b/32.png) [@Scott\_Pipkin](https://www.mineralrightsforum.com/u/Scott_Pipkin)
#### Post date: [January 20, 2014, 12:34am UTC](https://www.mineralrightsforum.com/t/division-order-question/11872/6 "2014-01-20T00:34:24Z")

</div>

Something isn’t correct with the numbers. You said that you have a 1/6 interest (collectively) but 115 is not 1/6 of 640 (106.66667 is), so the unit size is a little different or the 1/6 is not correct. Regardless, I will show you your decimal using the 115 acre number and 640 for the unit.

You have 38.33333 acres (1/3 of 115).

38.33333/640 (unit size) = 0.0598958

0.0598958 \* 0.1875 (lease royalty, assuming it’s a 3/16 lease) = 0.01123046 = unit net revenue interest.

If you participated in the well instead of leasing you would have the 0.0598958 number. The number of 0.048611 equates to a lot more acres in a 640 acre unit (assuming it’s leased). The NRI for your family’s entire 115.00 acre interest is 0.0336914 in a 640 acre unit leased at 3/16.

It almost sounds to me like you are a leasehold owner. If you had 1/3 of a 115 acre lease, leased at 3/16 then it would look like this.

38.33333/640 = 0.0598958 \* 0.8125 = 0.0486653, which is fairly close to their number.

---

<div class="post-metadata">

### Author: ![Scott\_MacKnight](https://www.mineralrightsforum.com/letter_avatar_proxy/v4/letter/s/848f3c/32.png) [@Scott\_MacKnight](https://www.mineralrightsforum.com/u/Scott_MacKnight)
#### Post date: [January 20, 2014, 4:51pm UTC](https://www.mineralrightsforum.com/t/division-order-question/11872/7 "2014-01-20T16:51:21Z")

</div>

Thanks everyone who has responded to my question. I think I may be more confused now than when I asked it! I think that I will have my attorney contact the landman with my question.

Scott Pipkin said:

> Something isn’t correct with the numbers. You said that you have a 1/6 interest (collectively) but 115 is not 1/6 of 640 (106.66667 is), so the unit size is a little different or the 1/6 is not correct. Regardless, I will show you your decimal using the 115 acre number and 640 for the unit.
> 
> You have 38.33333 acres (1/3 of 115)
> 
> 38.33333/640 (unit size)= 0.0598958
> 
> 0.0598958\* 0.1875 (lease royalty, assuming its a 3/16 lease)=0.01123046 = unit net revenue interest.
> 
> If you participated in the well instead of leasing you would have the 0.0598958 number. The number of 0.048611 equates to a lot more acres in a 640 acre unit (assuming it’s leased). The NRI for your family’s entire 115.00 acre interest is 0.0336914 in a 640 acre unit leased at 3/16.
> 
> It almost sounds to me like you are a leasehold owner. If you had 1/3 of a 115 acre lease, leased at 3/16 then it would look like this.
> 
> 38.33333/640= 0.0598958\*0.8125=0.0486653, which is fairly close to their number.

---

<div class="post-metadata">

### Author: ![Scott\_MacKnight](https://www.mineralrightsforum.com/letter_avatar_proxy/v4/letter/s/848f3c/32.png) [@Scott\_MacKnight](https://www.mineralrightsforum.com/u/Scott_MacKnight)
#### Post date: [January 21, 2014, 9:55pm UTC](https://www.mineralrightsforum.com/t/division-order-question/11872/8 "2014-01-21T21:55:11Z")

</div>

Just wanted to provide an update that my question was answered with a call to the company’s division analyst. It appears that the one producing well on our property is on a 40-acre tract, with 35 of those acres lying within our property boundaries and the other 5 acres within another owner’s. So, 35/40 = .875 \* .05555 (my 1/3) = .048611. Thanks to all who responded to my question!

---

<div class="post-metadata">

### Author: ![Scott\_Pipkin](https://www.mineralrightsforum.com/letter_avatar_proxy/v4/letter/s/e8c25b/32.png) [@Scott\_Pipkin](https://www.mineralrightsforum.com/u/Scott_Pipkin)
#### Post date: [January 21, 2014, 10:07pm UTC](https://www.mineralrightsforum.com/t/division-order-question/11872/9 "2014-01-21T22:07:21Z")

</div>

That definitely makes a lot more sense. Glad you got it figured out.

---

<div class="post-metadata">

### Author: ![system](https://www.mineralrightsforum.com/uploads/db5755/original/3X/6/c/6c7c56608c843272ad6e3662ce9562a5956f173e.png) [@system](https://www.mineralrightsforum.com/u/system)
#### Post date: [August 15, 2018, 1:00am UTC](https://www.mineralrightsforum.com/t/division-order-question/11872/10 "2018-08-15T01:00:32Z")

</div>


