# Couple of questions from a gas/oil challenged newbie!

**URL:** https://www.mineralrightsforum.com/t/couple-of-questions-from-a-gas-oil-challenged-newbie/8898
**Category:** General Mineral Rights Discussion
**Created:** [October 10, 2014, 11:15pm UTC](https://www.mineralrightsforum.com/t/couple-of-questions-from-a-gas-oil-challenged-newbie/8898 "2014-10-10T23:15:24Z")
**Posts on this page:** 4
**Page:** 1

<div class="post-metadata">

### Author: ![Alicia\_Buck](https://www.mineralrightsforum.com/letter_avatar_proxy/v4/letter/a/9f8e36/32.png) [@Alicia\_Buck](https://www.mineralrightsforum.com/u/Alicia_Buck)
#### Post date: [October 10, 2014, 11:15pm UTC](https://www.mineralrightsforum.com/t/couple-of-questions-from-a-gas-oil-challenged-newbie/8898/1 "2014-10-10T23:15:24Z")

</div>

Ok, so my family and I recently completed the leasing process of approximately 55 acres in Washington County, Pennsylvania with Rice Energy. Wahooo!

Question 1: When I look at the unit map that I was able to obtain from the DEP, it seems as the tract boundary is cutting our land out. Of course this map was made and approved a couple of months before our lease was finalized. Can the energy company simply add on additional acreage to production units? Or maybe I just don’t know how to read the map properly (good possibility!)

Question 2: So it is common for most horizontal production pads to have anywhere from 4 to 8 wells in it. Say the unit has 8 wells, but only 2 pass through your particular area. Are royalties only paid for the wells that pass through your particular acreage location (seems most logical) or is it a flat calculation of number of well heads and acreage owned within the unit?

Question 3: I am presuming that well heads are not all “cranked” into production at the same time on a unit? Yes, no? What is the approximate time span from development to production of horizontal wells?

Question 4: What the hell does “spud” mean, LOL!!!

I searched for these answers, but didn’t really find any definite answers!

Thank you in advance!

Alicia

---

<div class="post-metadata">

### Author: ![Clint\_Liles](https://www.mineralrightsforum.com/user_avatar/www.mineralrightsforum.com/clint_liles/32/16995_2.png) [@Clint\_Liles](https://www.mineralrightsforum.com/u/Clint_Liles)
#### Post date: [October 11, 2014, 3:36am UTC](https://www.mineralrightsforum.com/t/couple-of-questions-from-a-gas-oil-challenged-newbie/8898/2 "2014-10-11T03:36:52Z")

</div>

Alicia,

To ‘spud’ a well:

To ‘start the well drilling process’ by removing rock, dirt and other sedimentary material with the drill bit.

> **[Home](https://glossary.slb.com/)**
>
> The SLB Energy Glossary

---

<div class="post-metadata">

### Author: ![Alicia\_Buck](https://www.mineralrightsforum.com/letter_avatar_proxy/v4/letter/a/9f8e36/32.png) [@Alicia\_Buck](https://www.mineralrightsforum.com/u/Alicia_Buck)
#### Post date: [October 11, 2014, 2:56pm UTC](https://www.mineralrightsforum.com/t/couple-of-questions-from-a-gas-oil-challenged-newbie/8898/3 "2014-10-11T14:56:19Z")

</div>

Thank you, Clint!

Clint Liles said:

> Alicia,
> 
> To ‘spud’ a well:
> 
> To ‘start the well drilling process’ by removing rock, dirt and other sedimentary material with the drill bit.
> 
> [http://www.glossary.oilfield.slb.com/](http://www.glossary.oilfield.slb.com/)
> 
> Clint Liles

---

<div class="post-metadata">

### Author: ![system](https://www.mineralrightsforum.com/uploads/db5755/original/3X/6/c/6c7c56608c843272ad6e3662ce9562a5956f173e.png) [@system](https://www.mineralrightsforum.com/u/system)
#### Post date: [August 15, 2018, 12:13am UTC](https://www.mineralrightsforum.com/t/couple-of-questions-from-a-gas-oil-challenged-newbie/8898/4 "2018-08-15T00:13:02Z")

</div>


