# Chart for Price Per Rod based diameter and land being used?

**URL:** https://www.mineralrightsforum.com/t/chart-for-price-per-rod-based-diameter-and-land-being-used/55025
**Category:** Landman Discussion
**Created:** [January 18, 2020, 9:59pm UTC](https://www.mineralrightsforum.com/t/chart-for-price-per-rod-based-diameter-and-land-being-used/55025 "2020-01-18T21:59:25Z")
**Posts on this page:** 1
**Showing post:** 9

<div class="post-metadata">

### Author: ![James\_D](https://www.mineralrightsforum.com/letter_avatar_proxy/v4/letter/j/e9bcb4/32.png) [@James\_D](https://www.mineralrightsforum.com/u/James_D)
#### Post date: [February 12, 2020, 8:34pm UTC](https://www.mineralrightsforum.com/t/chart-for-price-per-rod-based-diameter-and-land-being-used/55025/9 "2020-02-12T20:34:35Z")

</div>

@Buddy - Good information!

I found an old post that you had mentioned $2.00 per inch when starting negotiations. That post was from 2013. What is the going rate (per inch) to start off with in today’s market? Is it still $200 and is this formula still a preferred method of getting a price to start negotiating?

Also - what are people seeing nowadays around Ward County? - Thanks!

Below is your post and a link to the post for reference.

> [@Price per foot/rod for new pipelines](https://www.mineralrightsforum.com/t/price-per-foot-rod-for-new-pipelines/12388/7):
>
> Buddy, i'm all mixed up! Ha! So, what would be the "ball-park" answer to the original question from Mr. Faulkner? Buddy Cotten said: Dear Jack, The computation is using pipeline diameter as part of an equation. For example, a 20 inch line x $2.00 per inch gives us a rough starting figure of $40.00 per foot. We are using apples and oranges to come up with an estimation. Buddy Cotten Mineral Manager

_ **What “going rate” means to me is that is what trade the weakest and less knowledgeable landowners signed for. Last 2 ROW that I negotiated were for $900 per rod and $675 per rod – on the same line in the same county. All line sections are fact specific and how hard you want to be.** _

_ **I will try one more time to explain the $2.00 per inch thing. Here is the equation:** _

_**(Nominal diameter of pipe) x $2.00 = Asking price per foot**_

_ **A 36 inch pipe would be priced out per foot, using the above formula:** _

_**(36) x $2.00 = $72.00 asking price per foot.**_

---

_[View the full topic](https://www.mineralrightsforum.com/t/chart-for-price-per-rod-based-diameter-and-land-being-used/55025)._
