# 4N 4W sections 28,33, and 35 drilling
**URL:** https://www.mineralrightsforum.com/t/4n-4w-sections-28-33-and-35-drilling/35562
**Category:** Garvin County, OK
**Created:** [October 21, 2018, 7:23pm UTC](https://www.mineralrightsforum.com/t/4n-4w-sections-28-33-and-35-drilling/35562 "2018-10-21T19:23:41Z")
**Posts on this page:** 8
**Page:** 1
### Author:  [@arkomo](https://www.mineralrightsforum.com/u/arkomo)
#### Post date: [October 21, 2018, 7:23pm UTC](https://www.mineralrightsforum.com/t/4n-4w-sections-28-33-and-35-drilling/35562/1 "2018-10-21T19:23:42Z")
It looks like Casillas has a permit to drill in Section 33 that goes up through Section 28. Then Marathon plans to drill in Section 35. All horizontal wells. I have interest in 33 and 35. Hope they start soon! Tom
---
### Author:  [@Lynden\_Foley](https://www.mineralrightsforum.com/u/Lynden_Foley)
#### Post date: [November 4, 2018, 7:15pm UTC](https://www.mineralrightsforum.com/t/4n-4w-sections-28-33-and-35-drilling/35562/2 "2018-11-04T19:15:59Z")
The Prairie 1-33-28WXH was spud on Oct 15. It is expected to be 78% in Section 28 and 22% in Section 33.
---
### Author:  [@arkomo](https://www.mineralrightsforum.com/u/arkomo)
#### Post date: [November 5, 2018, 12:36am UTC](https://www.mineralrightsforum.com/t/4n-4w-sections-28-33-and-35-drilling/35562/3 "2018-11-05T00:36:55Z")
Lynden, I saw that. Since I am in Section 33 and not 28 I will just get a piece of it but some is better than none! Marathon is supposed to drill in Section 35, hopefully soon. Take care.
---
### Author:  [@Lynden\_Foley](https://www.mineralrightsforum.com/u/Lynden_Foley)
#### Post date: [November 6, 2018, 8:37pm UTC](https://www.mineralrightsforum.com/t/4n-4w-sections-28-33-and-35-drilling/35562/4 "2018-11-06T20:37:14Z")
Tom, do you have any idea why that horizontal length was chosen?
---
### Author:  [@arkomo](https://www.mineralrightsforum.com/u/arkomo)
#### Post date: [November 6, 2018, 10:24pm UTC](https://www.mineralrightsforum.com/t/4n-4w-sections-28-33-and-35-drilling/35562/5 "2018-11-06T22:24:46Z")
Lynden, I believe total length was 6,550 feet. I am not sure why they chose this length and where it was drilled. Maybe proximity to other wells or maybe a fault line close, I just don’t know. I do wish they would have drilled all the way through Section 33, but maybe they will drill another one to complete drilling all of 33.
---
### Author:  [@Frank\_Pfisch](https://www.mineralrightsforum.com/u/Frank_Pfisch)
#### Post date: [November 7, 2018, 12:52am UTC](https://www.mineralrightsforum.com/t/4n-4w-sections-28-33-and-35-drilling/35562/6 "2018-11-07T00:52:25Z")
Maybe they intended to drill further and ran into a fault or mechanical problems.
---
### Author:  [@Lynden\_Foley](https://www.mineralrightsforum.com/u/Lynden_Foley)
#### Post date: [November 9, 2018, 4:15pm UTC](https://www.mineralrightsforum.com/t/4n-4w-sections-28-33-and-35-drilling/35562/7 "2018-11-09T16:15:37Z")
Maybe they saw the fault with the seismic survey. The surface location is SW, SW, NW in 33 basically.
---
### Author:  [@MRFAdmin\_SV](https://www.mineralrightsforum.com/u/MRFAdmin_SV)
#### Post date: [January 11, 2025, 6:13pm UTC](https://www.mineralrightsforum.com/t/4n-4w-sections-28-33-and-35-drilling/35562/8 "2025-01-11T18:13:23Z")